EPSON L3060 manual

User's Guide Network Settings Making Wi-Fi Direct (Simple AP) Connection Settings This method allows you to connect the printer directly to devices without an access point. The printer acts as an access point. c Important: When you connect from a computer or smart device to the printer using the Wi-Fi Direct (Simple AP) connection, the printer is connected to the same Wi-Fi network (SSID) as the computer or smart device and the communication is established between them. Since the computer or smart device is automatically connected to the other connectable Wi-Fi network if the printer is turned off, it is not connected to the previous Wi-Fi network again if the printer is turned on. Connect to the printer's SSID for Wi-Fi Direct (Simple AP) connection from the computer or smart device again. If you do not want to connect every time you turn the printer on or off, we recommend using Wi-Fi network by connecting the printer to an access point. 1. While holding down the alternately. button, press the button until the light and the light flash Wait until the process ends. When a connection is established, the 2. Load papers. 3. Hold down the light turns on. button on the printer for at least 10 seconds. The network status sheet is printed. You can check the SSID and Password for Wi-Fi Direct (Simple AP) on this sheet. Note: If you release the button within 10 seconds, a network connection report is printed. Note that the SSID and Password for Wi-Fi Direct (Simple AP) are not printed on this report. 4. On the computer's network connection screen or the smart device's Wi-Fi screen, select the same SSID shown on the network status sheet to connect. 22