EPSON L3060 manual

User's Guide Solving Problems ❏ Dry the printouts completely before filing or displaying them. When drying the printouts, avoid direct sun light, do not use a dryer, and do not touch the printed side of paper. ❏ When printing images or photos, Epson recommends using genuine Epson paper rather than plain paper. Print on the printable side of the genuine Epson paper. ❏ Try to use genuine Epson ink bottles. This product is designed to adjust colors based on the use of genuine Epson ink bottles. The use of non-genuine ink bottles may cause print quality to decline. ❏ Use ink bottles with the correct part code for this printer. ❏ Epson recommends using the ink bottle before the date printed on the package. Related Information & “Refilling the Ink Tanks” on page 69 & “Checking and Cleaning the Print Head” on page 73 & “Replacing Ink inside the Ink Tubes” on page 74 & “Aligning the Print Head” on page 75 & “Paper Handling Precautions” on page 32 & “Available Paper and Capacities” on page 33 & “List of Paper Types” on page 33 Paper Is Smeared or Scuffed ❏ When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper. ❏ When vertical banding appears or the paper is smeared, clean the paper path. ❏ Place the paper on a flat surface to check if it is curled. If it is, flatten it. ❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper. Related Information & “Loading Paper in the Rear Paper Feed” on page 34 & “Cleaning the Paper Path for Ink Smears” on page 76 107