Xerox 3270 manual

3270 Programmer’s Guide IBM Related Functions NOTE: If the converter is connecteddirectly to an IBM 4331 or 4361, the buffer size of 1920 characters (Function Y1=2) should be specified, due to a hard ware restriction on the mainframe. 4.3. IBM RPQ Settings The Functions 25 to 33 are similar to the RPQs you can order for an IBM 3287 or IBM 3268 printer as shown in the following table. On the IBM 4214, you may set the options from the front panel. The charts below show the correspondence between interface functions and IBM RPQ numbers. Function no. 3287 RPQs 25 N/A*) 26 SC3750 27 SC3741 28 S30219 29 S30219 30 N/A 31 SC3749 32 SC3739 33 SC3740 3268 RPQs N/A SC9508 SC9505 SC9501 SC9502 SC9503 SC9504 SC9506 SC9507 4214 RPQs N/A Opt. 20=3 Opt. 18=3 Opt. 15=1 Opt. 15=1 Opt. 16=2 Opt. 17=2 Opt. 19=1 Opt. 20=2 3812/16 RPQs N/A Switch C16 Switch C22 Swtich C18 Switch C19 Switch C20 Switch C21 Switch C23 Switch C24 3912/16 RPQs N/A *) N/A: Not Applicable Function no. 4028 RPQs 25 N/A*) 26 Set. 25 27 Set 31 28 Set. 27 29 Set. 28 30 Set. 29 31 Set. 30 32 Set. 32 33 Set. 33 *) N/A: Not Applicable - 24 - PrintImage CR at MPP+1 NL at MPP+1 FF Data FF Last FF Valid Auto Function