Xerox 3270 manual

3270 Programmer’s Guide Translate Tables been programmed, you only need to enter 3 characters in the datastream to send the user string to your printer. %Z<user string no. > Sending user string under host control Several functions relate to the user string facility. Among these functions are: • Function Y61, Setup of User Strings, used for the defining of the user strings. • Function Y51, User Defined Strings at Power On, used for specifying the "Power On" string • Function Y52, User Defined Strings at Printer Power On/Printer Error, specifying the Error Recovery strings. Examples: Escape Sequence Function %Y61,3,1B,45% Defines string 3 with the PCL command for "RESET". %Y51,1,5,7% Send strings 1,5,7 at power on %Y52,4% Send string 4 at printer error %Z6 Send string 6 Fig. 7-1 User string commands 7.1.1. User String as Input Function Y90, User Escape String Definition is used to define a string which can be sent to the interface as input. Since the string is sent as input to the interface it can be used to change FSL setup functions. In Function 90, you may define strings with "identifiers" in HEX depending on the available memory area in the permanent memory area. These strings are sent as input to the interface when escape "identifier" is received via the line. %Y90,1A,'ABCD':8F,'%Y2,8%'% - 30 -