Ricoh C125 MF manual

4. Copying Originals Specifying Scan Settings for Copying This section describes how to specify image density and scan quality for the current job. Adjusting Image Density There are five image density levels. The higher the density level, the darker the printout. 1. Press the [Home] key. 2. Press the [Copier] icon on the [Home] screen. 3. Press [Text/Photo]. 4. Press [ ] or [ ] to select the desired density level, and then press [OK]. • You can change the machine's default [Density] setting to always make copies with a specific density level. For details, see page 213 "Copier Settings". • Temporary job settings are cleared in the following cases: • When no input is received for the period of time specified in [System Reset Timer] while the initial screen is displayed. For details, see page 247 "Administrator Tools Settings". • When the [Clear/Stop] key is pressed while the initial screen is displayed. • When the machine's mode is changed. • When the power is turned off. • When the machine's default for the same setting is changed. Selecting the Document Type According to Original There are three document types: 118