Ricoh C125 MF manual

8. Configuring the Machine Using Utilities Configuring the IPsec Settings Click [IPsec Settings] to display the page for configuring the IPsec settings. This page contains the following tabs: [IPsec Global Settings] and [IPsec Policy List]. • This function is available only when an administrator password is specified. IPsec Global Settings Tab Item Description IPsec Function Select whether to enable or disable IPsec. Default Policy Select whether to allow for the default IPsec policy. Broadcast and Multicast Bypass Select the services that you do not want to apply IPsec from the following: All ICMP Bypass Select whether to apply IPsec to ICMP packets (IPv4 and IPv6) from the following: [DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550] [Active]: All ICMP packets will be bypassed without IPsec protection. "ping" command (echo request and echo reply) is not encapsulated by IPsec. [Inactive]: Some ICMP message types will be bypassed without IPsec protection. IPsec Policy List Tab Item Description No. IPsec policy number. Name Displays the name of the IPsec policy. Address Settings Displays the IP address filter of the IPsec policy as below: Remote address/Prefix length Action 306 Displays the action of the IPsec policy as "Allow", "Drop", or "Require Security".