Ricoh C125 MF manual

Common Problems Common Problems This section describes how to troubleshoot common problems that may occur while operating the machine. Problem The machine does not turn on. Possible cause The power cord is not connected properly. Solution • Make sure that the power plug is firmly inserted into the wall outlet. • Make sure that the wall outlet is not defective by connecting another working device. An error message is shown on the machine's screen. An error has occurred. See page 341 "Error and Status Messages on the Screen". Pages do not print. The machine is warming up or receiving data. Wait until "Printing..." appears on the screen. If "Processing..." is displayed on the screen, the machine is receiving data. Pages are not printed. The interface cable is not connected correctly. Strange noise is heard. • Reconnect the cable. • Check that the interface cable is the correct type. • The supplies are not properly installed. • Confirm that the supplies are properly installed. • If [Auto Cleaning] in [System Settings] is set to [On], the machine automatically cleans its interior periodically. • Wait until the cleaning has finished. This is not a malfunction. The volume of the sounds produced by the machine is too loud. The volume is set to the high level. Adjust the volume of the beep, ring, speaker, and alarm sounds. For details, see page 231 "System Settings". The volume of the sounds produced by the machine is too quiet. The volume is muted or set to the Adjust the volume of the beep, low level. ring, speaker, and alarm sounds. For details, see page 231 "System Settings". 391