Ricoh C125 MF manual

Configuring the Administrator Settings Configuring the Administrator Settings Click [Administrator Tools] to display the page for configuring the administrator settings. This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore Setting], [Set Date/Time], and [Energy Saver Mode]. Administrator Tab Administrator Settings Item Description Change Password Check this to configure the administrator password. New Password Enter the new administrator password. Can contain up to 16 characters. Confirm New Password Enter the same password again, to confirm. Change E-mail Address Check this to configure the administrator e-mail address. Administrator E-mail Address Enter the administrator e-mail address. If the machine's e-mail address is not configured in the [SMTP] page, this address will be used as the sender's address of e-mails sent from this machine, such as notification e-mails and Internet Faxes. Can contain up to 64 characters. • To change the password, it is necessary to enter the current password. • The password must be specified during the Initial Setup, which is required after turning on the machine for the first time. For details, see Setup Guide. Note that the password is cleared when the settings are reset. Reset Settings Tab Reset Settings Item Description Reset Network Settings Select to clear the settings configured under the [Network Settings]. Reset Menu Settings Select to clear the settings that are not related to the network to their defaults. 311