Ricoh C125 MF manual

2. Paper Specifications and Adding Paper Placing Originals This section describes the types of originals you can set and how to place them. Placing Originals on the Exposure Glass This section describes the procedure for placing originals on the exposure glass. • Do not place originals before any correction fluid and toner has completely dried. Doing so may make marks on the exposure glass that will appear on copies. • The original in the ADF takes precedence over the original on the exposure glass if you place originals both in the ADF and on the exposure glass. • Be careful not to hold the input tray when lifting the ADF, for the tray might be damaged. 1. Lift the ADF. 2. Place the original face down on the exposure glass. The original should be aligned to the rear left corner. ECC120 3. Lower the ADF. Hold down the ADF with your hands when using thick, folded, or bound originals and when the ADF cannot be lowered completely. Placing Originals in the Auto Document Feeder By using the ADF, you can scan multiple pages at once. • Do not place different size originals in the ADF at once. • Straighten curls in the originals before placing them in the ADF. 74