Ricoh C125 MF manual

10. Troubleshooting Scanner Problems When You Cannot Browse the Network to Send a Scan File Problem Solution The following machine settings may not be correct: Check the settings. See page 289 "Configuring the Network Settings". • IP address • Subnet Mask When Scanning Is Not Done As Expected Problem Solution The machine does not start scanning. The ADF or its cover is open. Close the ADF or its cover. The scanned image is dirty. • The exposure glass or ADF is dirty. See page 315 "Maintaining the Machine". • Before placing originals on the exposure glass, make sure that toner or correction fluid is dry. 380 The scanned image is distorted or out of position. The original was moved during scanning. Do not move the original during scanning. The scanned image is upside down. The original was placed upside down. Place the original in the correct orientation. See page 74 "Placing Originals". The scanned image is blank. The original was placed with the front and back reversed. When using the exposure glass, place originals copy side down. When using the ADF, place originals copy side up. See page 74 "Placing Originals". The scanned image is too dark or too light. Adjust the image density. See page 162 "Specifying Scan Settings for Scanning".