Ricoh C125 MF manual

Fax Problems Fax Problems When You Cannot Send or Receive Fax Messages As Wanted Transmission Problem Causes Solutions The telephone line may be disconnected. Check if the telephone line is properly connected to the machine. For details, see Setup Guide. The machine cannot accept a new fax job because there are 5 unsent faxes in memory already. Wait until any of these faxes is transmitted completely, or use the [Delete TX Stand.File] function to delete unnecessary faxes. For details, see page 221 "Fax Settings". Document appears blank at the other end. The original was placed upside down. The original was placed upside down. Place the original in the correct orientation. See page 74 "Placing Originals". Printed or sent images are spotty. The exposure glass, exposure glass, exposure glass cover, or guide plate of the ADF is dirty. Clean them. For details about how to clean the machine, see page 336 "Cleaning the Exposure Glass". Make sure ink or correction fluid is dry before placing originals. Reception is possible, but transmission is not. There are regions and Contact your sales or service telephone exchanges where representative. a dial tone cannot be detected. Transmission failed due to "maximum e-mail size" error. If the e-mail size specified on the machine is too large, the Internet Fax document cannot be sent. Cannot send files. Change the setting for [Maximum Email Size] in [Scanner Settings]. For details about the maximum e-mail size, see page 218 "Scanner Settings". 381