Ricoh C125 MF manual

5. Scanning Originals If you see this screen, proceed to the next step. 8. If you have more originals to scan, place the next original on the exposure glass, and then press [Yes]. Repeat this step until all originals are scanned. 9. When all originals have been scanned, press [No] to start sending the scanned file. 10. Wait until "Completed the Process" is displayed on the screen. Scanned files are saved in the root directory of the USB flash memory device. 11. Remove the USB flash memory device from the machine. • To cancel scanning, press the [Clear/Stop] key. The scan files are discarded. • You can configure the machine to perform black-and-white scanning in halftone or grayscale by changing [B&W scanning Mode] setting under [Scanner Settings]. For details about [B&W scanning Mode], see page 218 "Scanner Settings". • If the [Limitless Scan] setting under [Scanner Settings] is enabled, you can place originals on the exposure glass repeatedly in a single scan procedure. For details about [Limitless Scan], see page 218 "Scanner Settings". • If the [Single/ Multi Page] setting under scanner settings is set to [Multi-page], you can scan multiple pages to create a single PDF or TIFF file containing all pages. However, if the file format is JPEG, a single-page file will be created for every page scanned. For details about [Single/ Multi Page], see page 218 "Scanner Settings". • If paper is jammed in the ADF, the scan job will be put on hold. To resume the current job, remove the jammed paper and scan the originals again starting from the jammed page. For details about how to remove the paper jammed in the ADF, see page 359 "Removing Scanning Jams". 148