Ricoh C125 MF manual

Administrator Tools Settings Item Description System Reset Timer Sets the machine to return to the mode specified in [Function Priority]. This setting is also applied to the timeout for copying the next document while ID card copy and manual 2-sided copy is performed. Value • Off • 30 sec. • 1 min. • 2 min. • 3 min. • 5 min. • 10 min. Default: [1 min.] Energy Saver Mode Sets the machine to enter Energy Saver Mode 1 or Energy Saver Mode 2, to reduce power consumption. The machine recovers from Energy Saver Mode when it receives a print job, prints a received fax, or one of the keys on the control panel is pressed. • Energy Saver Mode 1 The machine enters Energy Saver Mode 1 if the machine has been idle for about 30 seconds. It takes less time to recover from Energy Saver Mode 1 than from power-off state or Energy Saver Mode 2, but power consumption is higher in Energy Saver Mode 1 than in Energy Saver Mode 2. • Off • On Default: [Off] Energy Saver Mode Sets the machine to enter Energy Saver Mode 1 or Energy Saver Mode 2, to reduce power consumption. The machine recovers from Energy Saver Mode when it receives a print job, prints a received fax, or one of the keys on the control panel is pressed. • Energy Saver Mode 2 The machine enters Energy Saver Mode 2 after the period of time specified for this setting is passed. The machine consumes less power in Energy Saver Mode 2 than in Energy Saver Mode 1, but it takes longer to recover from Energy Saver Mode 2 than from Energy Saver Mode 1. 1 to 60 minutes Default: 1 minute 249