Ricoh C125 MF manual

Configuring the Network Settings Admin Account Item User Name Description (Required) Enter the user name for logging in to the SNMPv3. Can contain up to 32 characters. Security Settings Specify the user account security setting by selecting one of the following: [Authentication Encryption]: It is necessary to specify [Authentication Algorithm], [Authentication Password], [Encryption Algorithm], and [Encryption Password]. [Authentication Non-Encryption]: It is necessary to specify [Authentication Algorithm] and [Authentication Password]. [Encryption Algorithm] and [Encryption Password] cannot be specified. [Non-Authentication Non-Encryption]: [Authentication Algorithm], [Authentication Password], [Encryption Algorithm] and [Encryption Password] cannot be specified. Authentication Algorithm Specify the authentication algorithm from the following: Authentication Password Enter a password for the Admin account. Can contain up to 32 characters. [MD5], [SHA1], [SHA224], [SHA256], [SHA384], [SHA512] (Required) Encryption Algorithm Specify the encryption algorithm from the following: [AES128], [DES] Encryption Password Enter a password for encrypting the Admin account password. (Required) Can contain up to 32 characters. MIB Access Type Select an access type for the administrator account to access MIB from the following: [read-only], [write-only], [read-write], [Not-Accessible] SNMPv3 Trap Item SNMPv3 Trap Description Select whether to enable the machine to send SNMPv3 traps to the management host (NMS). When disabled, [SNMPv3 Management Host 1] and [SNMPv3 Management Host 2] below become unavailable. 297