Ricoh C125 MF manual

Configuring the Network Settings Item Description User Name Enter the user name for logging in to the SMTP server. Can contain up to 32 characters. Password Enter the password for logging in to the SMTP server. Can contain up to 32 characters. Device E-mail Address Enter the machine’s e-mail address. This address is used as the sender's address of e-mail messages sent from this machine, such as notification e-mails. Can contain up to 64 characters. Server Timeout (seconds) Enter the number of seconds the machine waits before considering an SMTP operation to have timed out (1 to 999). Time Zone Select a time zone according to your geographic location. Selecting a different time zone may cause transmission date and time to be incorrect for email sent by the Scan to E-mail function, even when the machine's clock is set correctly. POP3 Tab POP3 Settings Item Description POP3 Server Enter the IP address or host name of the POP3 server for e-mail reception. The POP3 server specified here will be used for [POP before SMTP]. Can contain up to 64 characters. SSL/TLS Select whether or not to apply SSL/TLS encryption when receiving e-mails from the POP3 server. Check the box to enable SSL/TLS. Port No. Enter the port number for POP3 (1 to 65535). If [SSL/TLS] is checked, Port 995 is automatically selected. (Otherwise, Port 110 is selected by default.) User Account Enter the user name for logging in to the POP3 server. Can contain up to 32 characters. User Password Enter the password for logging in to the POP3 server. Can contain up to 32 characters. 299