Ricoh C125 MF manual

Printer Problems Problem Solution The message "Processing..." does not If the message "Processing..." does not appear on the control appear on the control panel after panel after printing, the printer has not received the data. printing. If the printer is connected to the computer using the interface cable. Check the port connection setting is correct. Network Connection Contact your network administrator. Black gradation is not natural. Only when using PostScript 3 Select [CMY + K] for [Gray Reproduction] in the printer driver's dialog box. See the printer driver Help. Solid lines are printed as broken lines. Only when using PostScript 3 Change the [Dithering] setting in the printer driver's dialog box. See the printer driver Help. Fine dot patterns do not print. Only when using PostScript 3 Change the [Dithering] setting in the printer driver's dialog box. See the printer driver Help. Solid areas, lines or text are shiny or glossy when created as a mixture of cyan, magenta, yellow. Only when using PostScript 3 Select [Black by K] for [Gray Reproduction] in the printer driver's dialog box. See the printer driver Help. Speckling occurs in areas of solid black print. Only when using PostScript 3 Select [CMY + K] for [Gray Reproduction] in the printer driver's dialog box. See the printer driver Help. 375