Ricoh C125 MF manual

11. Configuring Network Settings 4. Press [Network Settings]. 5. Enter the password using the number keys, and then press [OK]. You can display the software keyboard by double tapping the entry area on the display. A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock] under [Administrator Tools] menu. 6. Press [Wi-Fi Enable]. 7. Press [Enable]. 8. Turn off the machine, and then turn it back on. 9. Press the wireless LAN icon. 10. Enter the password using the number keys, and then press [OK]. You can display the software keyboard by double tapping the entry area on the display. A password for accessing the [Wi-Fi Configuration] menu can be specified in [Admin. Tools Lock] under [Administrator Tools] menu. 11. Press [Setup Wizard]. 12. Press the SSID of the router (access point) from the searched SSID list. 13. Enter the encryption key using the number keys, and then press the [Connect]. As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f). 14. Check the result. • Connection has succeeded: Configuring the Wi-Fi settings is complete. • Connection has failed: Check the configuration for the router (access point), and then try the connection again. Using the WPS Button A router (access point) is needed to set up a connection. Make sure the Ethernet cable is not connected to the machine. 1. Check that the router (access point) is working correctly. If [Detailed Setup] is selected in the initial settings, select [Wireless (Wi-Fi)] and proceed to Step 11. 396