Ricoh C125 MF manual

11. Configuring Network Settings 14. Press the WPS button on the router (access point) within two minutes. WPS CHV607 For details about how to use the WPS button, refer to the manuals for the router (access point). 15. Check the result. • Connection has succeeded: Press [OK] to return to the screen displayed in Step 12, and then press the [Home] key to return to the initial screen. Configuring the Wi-Fi settings is complete. • Connection has failed: Press [OK] to return to the screen displayed in Step 12. Check the configuration for the router (access point), then try the connection again. Using a PIN Code A router (access point) is needed to set up a connection. To establish a connection using the PIN code, use a computer that is connected to the router (access point). Make sure the Ethernet cable is not connected to the machine. 1. Check that the router (access point) is working correctly. 2. Open the PIN code configuration window (web page) for the router (access point) on your computer. If [Detailed Setup] is selected in the initial settings, select [Wireless (Wi-Fi)] and proceed to Step 12. 398