Ricoh C125 MF manual

Sending a Fax • When in Memory Transmission mode, the machine's memory may become full while scanning the originals. In this case, the screen prompts you to cancel the transmission or to send only the pages that have been scanned successfully. • You can scan 2-sided originals from the ADF in Memory Transmission mode. Specify how to scan 2-sided originals in the [Fax Original] setting under [Transmission Setting]. For [Fax Original], see page 221 "Fax Settings". • If paper is jammed in the ADF, the jammed page has not been scanned properly. When the machine is in Immediate Transmission mode, resend the fax starting from the jammed page. When in Memory Transmission mode, scan the entire originals again. For details about removing paper jammed in the ADF, see page 351 "Removing Paper Jams". • The machine can store up to 5 unsent fax jobs. Canceling a Transmission This section explains how to cancel a fax transmission. Canceling a transmission before the original is scanned Use this procedure to cancel a transmission before pressing the [B&W Start] key. 1. Press the [Clear/Stop] key. Canceling a transmission while the original is being scanned Use this procedure to cancel scanning or transmitting of the original while it is being scanned. 181