Ricoh C125 MF manual

Error and Status Messages on the Screen Message Causes Solutions Sort Copy was Cancelled The machine's memory reached capacity while originals were being scanned from the ADF to perform sort copying. Press [Exit] to print the originals that were successfully scanned into memory. Then, copy again the originals left in the ADF. Waste Toner Bottle Setting Error The waste toner bottle has been installed incorrectly. Reinstall the waste toner bottle. See page 320 "Replacing the Waste Toner Bottle". TX Communication Error A transmission error occurred, and the fax could not be transmitted correctly. If the [Auto Redial] setting is enabled, the machine will redial the number and try again. If all attempts fail, or if the machine is in Immediate Transmission mode, the fax will not be transmitted. Try the operation again. Unavailable Paper Type 2-sided copy could not be performed because the tray does not contain the valid type paper, which is thin, plain, middle thick, recycled, color, preprinted or prepunched. • Specify the tray containing the valid type paper (other than the bypass tray) in the [Select Paper] setting. See page 213 "Copier Settings". • Specify the valid paper type for the tray selected for printing copies. See page 242 "Paper Settings". Unsupported Device Please Remove The Scan to USB function failed because a USB device other than a USB flash disk or a USB flash disk with an unsupported file system was used. Use a USB flash disk that is compatible with the Scan to USB function. Unsupported USB Hub Please Remove The Scan to USB function failed because a USB device other than a USB flash disk or a USB flash disk with an unsupported file system was used. Use a USB flash disk that is compatible with the Scan to USB function. USB Disconnected The Scan to USB function failed because the USB flash disk was removed before the operation could be completed. Check that the USB flash disk is securely inserted in the machine. Do not pull out the USB flash disk until "Ready" appears on the display. Press Clear key 349